Configuring Wlan Firewall Rules - Brocade Communications Systems RFS6000 System Reference Manual

Broadcast Storm Configure the Broadcast Storm Threshold for each interface. When the rate of broadcast packets exceeds the high
Threshold threshold configured for an interface, packets are throttled till the rate falls below the configured rate. Thresholds
are configured in terms of packets per second. The threshold range is 1-1000000 packets per second.
Multicast Storm Configure the Multicast Storm Threshold for each interface. When the rate of multicast packets exceeds the high
Threshold threshold configured for an interface, packets are throttled till the rate falls below the configured rate. Thresholds
are configured in terms of packets per second. The threshold range is 1-1000000 packets per second.
Unknown Unicast Configure the Unknown Unicast Storm Threshold for each interface. When the rate of unknown unicast packets
Storm exceeds the high threshold configured for an interface, packets are throttled till the rate falls below the configured
rate. Thresholds are configured in terms of packets per second. The threshold range is 1-1000000 packets per
second.
6. Refer to the Status field for the state of the requests made from applet. This field displays error
7.
8. Click Cancel to close the dialog without committing updates to the running configuration.

Configuring WLAN Firewall rules

To review WLAN firewall rules:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
3. Click the WLAN tab.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
messages if something goes wrong in the transaction between the applet and the switch.
Click OK to use the changes to the running configuration and close the dialog.
6
369