Brocade Communications Systems RFS6000 System Reference Manual page 531

3. Ensure the Adopt unconfigured radios automatically option is NOT selected.
4. When disabled, there is no automatic adoption of non-configured radios on the network.
NOTE
For IPSec deployments, refer to
and take note of the CLI commands in red and associated comments in green.
5. Select Network > Wireless LANs from the switch main menu tree.
6. Select the target WLAN you would like to use for AAP support from those displayed and click
7.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Additionally, default radio settings will NOT be applied to Access Ports when automatically
adopted.
Any WLAN configured on the switch becomes an extended WLAN by default for an AAP.
the Edit button.
Select the Independent Mode (AAP Only) checkbox.
Selecting the checkbox designates the WLAN as independent and prevents traffic from
being forwarded to the switch. Independent WLANs behave like WLANs as used on a a
standalone Access Point. Leave this option unselected (as is by default) to keep this WLAN
an extended WLAN (a typical centralized WLAN created on the switch).
Sample Switch Configuration File for IPSec and Independent WLAN
A
519