4. The DoS Attack tab contains the following information:
Type
Displays the Denial of Service attack type. The switch currently supports enabling or disabling 28 types of DoS
attack filters.
Check Enabled
This field will show a green checkmark next to the Denial of Service Attack filters that are enabled on the switch
firewall. When a DoS Attack filter is disabled a red "X" will be shown in this column.
Logging Level
The Logging Level field displays the level of Syslog logging enabled for each DoS Attack filter. The logging level uses
standard Syslog levels of:
•
Emergency
•
Alert
•
Critical
•
Error
•
Warning
•
Notice
•
Info
•
Debug
•
None
To change the logging level, click on the specific field and choose the logging level from the pull-down menu.
Attack Count
Displays the number of times that each DoS attack have been observed by the switch firewall. Clicking the
Stats
Last Occurrence
Displays the amount of time since each DoS attack has been observed by the switch firewall. Clicking the
Stats
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
button on this page will reset all
button on this page will reset all
Attack Counts
to 0.
Last Occurrence
timers to 0:00:00.00.
6
Clear
Clear
373