Brocade Communications Systems RFS6000 System Reference Manual page 87

1. Refer to the Source field to specify the source file. Use the From drop-down menu and select
2. Use the Browse button and select a file for transfer.
3. Use the To drop-down menu (within the Target field) and select Server. This defines the transfer
4. Use the Using drop down-menu to configure whether the log file transfer is conducted using
NOTE
On the Brocade Mobility RFS7000, users can also transfer files using USB or Compact Flash. On the
Brocade Mobility RFS6000, users can also transfer files using USB. On the Brocade Mobility
RFS4000, users can also transfer the files using USB, or PCI Express.
5. Enter the Password required to send the configuration file from an FTP server.
6. Specify the appropriate Path name to the target directory on the server. The target options are
7.
8. Click Abort at any time during the transfer process to abort the file transfer.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Wireless Switch.
location of the configuration file. Enter the file location marked to store the transferred file.
FTP, TFTP, or SFTP. This field displays the default port for FTP,TFTP, or SFTP. The value in this
field can be configured as required. Enter the IP Address of the server receiving the source
configuration. Ensure the IP address is valid or risk jeopardizing the success of the file transfer.
Enter the User ID credentials required to transfer the configuration file from an FTP server.
different depending on the target selected.
Click the Transfer button to complete the file transfer. The Message section in the main menu
area displays the file transfer message.
3
75