Brocade Communications Systems RFS6000 System Reference Manual page 387

3. Click the Role tab.
4. Select the checkbox Role Assignment Immediate and click Apply to assign the role
5. Role configuration screen displays the following information:
Sequence Number Displays the sequence number associated with each role. Sequence numbers determine the order that role are
applied. Roles with lower sequence numbers are applied before those with higher sequence numbers. Sequence
numbers are assigned when a role is created and cannot be edited.
Role Name Displays the name of each role. The role name is configured when the role is created and cannot be edited.
AP Location Displays the AP Location filters, if any, applied to each role. The AP location filters can be set when the role is created
or may be edited by selecting a role and clicking the
ESSID Displays the ESSID filters, if any, applied to each role. The ESSID location filters can be set when the role is created or
may be edited by selecting a role and clicking the
client MAC Address Displays the client MAC Address filters, if any, applied to each role. The client MAC Address filters can be set when the
role is created or may be edited by selecting a role and clicking the
Group Name Displays the Radius Group name, if any, that is associated with each role.The Group Name filters can be set when the
role is created or may be edited by selecting a role and clicking the
6. To create a new role, click the Add button. For more information see Creating a new Role on
7.
8. To remove a role, select that rule from the table and click the Delete button. A confirmation will
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
immediately.
page 6-376.
To edit an existing role, click the Edit button and modify the filter settings.
be displayed before the rule is deleted from the switch.
Edit
button.
Edit
button.
Edit
button.
Edit
button.
6
375