Brocade Communications Systems RFS6000 System Reference Manual page 417

To define the IPSEc VPN's remote configuration:
1. Select Security > IPSec VPN from the main menu tree.
2. Click the Remote tab.
3. Refer to the Configuration field to define the following:
DNS Server Enter the numerical IP address of the DNS Server used to route information to the remote destination of the IPSec
VPN.
WINS Server Enter the numerical IP address of the WINS Server used to route information to the remote destination of the IPSec
VPN.
Apply
Apply Click
Revert Click the
4. Click the IP Range tab to view the following:.
Index Enter the index assigned to the range of IP addresses displayed in the Starting and Ending IP Address ranges. This
index is used to differentiate the index from others with similar IP addresses.
Starting IP Address Enter the numerical IP address used as the starting address for the range defined. If the Ending IP address is left
blank, only the starting address is used for the remote destination.
Ending IP Address Enter a numerical IP address to complete the range. If the Ending IP address is blank, only the starting address is
used as the destination address.
5. Click the Edit button (within the IP Range tab) to modify the range of existing IP addresses
6. Select an IP address range index and click the Delete button to remove this range from those
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
to save any updates made to the screen.
Revert
button to disregard changes and revert back to the last saved configuration.
displayed.
available within the IP Range tab.
6
405