Brocade Communications Systems RFS6000 System Reference Manual page 351

To configure Access Point Containment and view rogue APs:
1. Select Security > Access Port Intrusion Detection from the main menu tree.
2. Click on the AP Containment tab.
The AP Containment screen is divided into two sections, configuration and rogue AP information.
3. To enable the AP containment feature, check the Enable Containment checkbox and specify a
4. When the containment feature has been enabled and a Containment Interval has been set,
5. The rogue AP table displays the following information about known rogue APs:
Index
Rogue BSS Mac
Number of Finders
Channel
6. To manually add a rogue AP to the table, click the Add button and enter the MAC address of the
7.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Containment Interval between 20 and 5000 milliseconds.
The Containment Interval field determines the interval after which broadcast 802.11
de-authentication messages will be sent.
click the Apply button to enable the feature and save the interval value.
A unique numerical ID assigned by the switch for each of the known rogue APs.
Display a list of all know Rogue BSS MAC Addresses known to the switch.
Displays the number of detector APs that have found each of the specified Rogue APs.
Displays the channels that each of the known Rogue APs are broadcasting on.
known rogue AP.
To remove an AP from the rogue AP table, select that AP and click the Delete button.
6
339