Brocade Communications Systems RFS6000 System Reference Manual page 155

4. Refer to the Information field for the following information:
ESSID
VLAN
Num Associated
Clients
Authentication Type
Encryption Type
Adopted Radios
5. Refer to the Traffic field for the following information (both received and transmitted):
Pkts per second Displays the average total packets per second that cross the selected WLAN. The Rx column displays the average
total packets per second received on the selected WLAN. The Tx column displays the average total packets per
second sent on the selected WLAN. The number in black represents this statistics for the last 30 seconds and the
number in blue represents this statistics for the last hour.
Throughput Displays the average throughput in Mbps on the selected WLAN. The Rx column displays the average throughput in
Mbps for packets received on the selected WLAN. The Tx column displays the average throughput for packets sent
on the selected WLAN. The number in black represents this statistics for the last 30 seconds and the number in blue
represents this statistics for the last hour.
Avg Bit Speed Displays the average bit speed in Mbps on the selected WLAN. This includes all packets sent and received. The
number in black represents this statistics for the last 30 seconds and the number in blue represents this statistics
for the last hour.
Non-unicast Pkts Displays the percentage of the total packets for the selected WLAN that are non-unicast. Non-unicast packets
include broadcast and multicast packets. The number in black represents this statistics for the last 30 seconds and
the number in blue represents this statistics for the last hour.
6. Refer to the RF Status field for the following information:
Avg client Signal Displays the average RF signal strength in dBm for all Clients associated with the selected WLAN. The number in
black represents this statistics for the last 30 seconds and the number in blue represents this statistics for the last
hour.
Avg client Noise Displays the average RF noise for all Clients associated with the selected WLAN. The number in black represents this
statistics for the last 30 seconds and the number in blue represents this statistics for the last hour.
Avg client SNR Displays the average Signal to Noise Ratio (SNR) for all Clients associated with the selected WLAN. The Signal to
Noise Ratio is an indication of overall RF performance on your wireless network.
7.
Average Number of Displays the average number of retries for all Clients associated with the selected WLAN. The number in black
Retries represents this statistics for the last 30 seconds and the number in blue represents this statistics for the last hour.
% Gave Up Pkts Displays the percentage of packets the switch gave up on for all Clients associated with the selected WLAN. The
number in black represents this statistics for the last 30 seconds and the number in blue represents this statistics
for the last hour.
% Non-decryptable Displays the percentage of undecryptable packets for all Clients associated with the selected WLAN. The number in
Pkts black represents this statistics for the last 30 seconds and the number in blue represents this statistic for the last
hour.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Information in black represents the statistics from the last 30 seconds and information in blue
represents statistics from the last hour.
Displays the Service Set ID (SSID) for the selected WLAN.
Displays the name of the VLAN the WLAN is associated with.
Displays the total number of Clients currently associated with the selected WLAN.
Displays the authentication method deployed on the WLAN.
Displays the encryption type deployed on the selected WLAN.
Displays the radios adopted by the selected WLAN.
Refer to the Errors field for the following information:
4
143