6
•
•
•
Defining Dynamic NAT Translations
Dynamic NAT translates the IP address of packets going out from one interface to another interface
based on the conditions configured in the list. Dynamic NAT requires packets to be switched
through the NAT router to generate translations in the switch translation table.
Refer to the NAT screen's Dynamic Translation tab to view existing dynamic NAT configurations
available to switch.
To view and add/edit a dynamic NAT configuration:
1. Select Security > NAT from the main menu tree.
2. Click on the Dynamic Translation tab.
386
Defining Static NAT Translations
Configuring NAT Interfaces
Viewing NAT Status
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01