Brocade Communications Systems RFS6000 System Reference Manual page 141

To configure an external Radius Server for EAP 802.1x, Hotspot, or Dynamic MAC ACL WLAN
support:
NOTE
To optimally use an external Radius Server with the switch, Brocade recommends defining specific
external Server attributes to best utilize user privilege values for specific switch permissions. For
information on defining the external Radius Server configuration, see
Radius Server for Optimal Switch Support on page
1. Select Network > Wireless LANs from the main menu tree.
2. Select an existing WLAN from those displayed within the Configuration tab.
3. Click the Edit button.
4. Select either the EAP 802.1x, Hotspot, or Dynamic MAC ACL button from within the
5. Select the Radius Config... button. The Radius Configuration screen displays for defining an
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Authentication field. This enables the Radius Config... button at the bottom of the Network >
Wireless LANs > Edit screen.
external Radius or NAC Server.
The Radius Configuration screen contains tabs for defining both the Radius and NAC
server settings. For NAC overview and configuration information, see Configuring NAC
Server Support on page 4-132.
Configuring an External
4-131.
4
129