Brocade Communications Systems RFS6000 System Reference Manual page 154

4
NOTE
When using mesh-enabled WLAN statistics, no statistics are shown. This is because WLAN statistics
are generated by mobile unit traffic for that particular WLAN. In a mesh configuration, there are
typically no mobile units associated and therefore no statistical information to display.
5. To view WLAN statistics in a graphical format, select a WLAN and click the Graph button. For
6. To view WLAN packet data rates and retry counts, select a WLAN and click the Switch Statistics
Viewing WLAN Statistics in Detail
When the WLAN Statistics screen does not supply adequate information for an individual WLAN,
the Details screen is recommended for displaying more granular information for a single WLAN.
Use this information to discern if a WLAN requires modification to meet network expectations.
To view detailed statistics for a WLAN:
1. Select a Network > Wireless LANs from the main menu tree.
2. Click the Statistics tab.
3. Select a WLAN from the table displayed in the Statistics screen. and click the Details button. v
142
more information, see Viewing WLAN Statistics in a Graphical Format on page
button. For more information, see
The Details screen displays the WLAN statistics of the selected WLAN. The Details screen
contains the following fields:
•
Information
•
Traffic
•
RF Status
•
Errors
Viewing WLAN Switch Statistics on page
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
4-144.
4-145.
53-1002515-01