Brocade Communications Systems RFS6000 System Reference Manual page 186

4
To configure AP Mesh:
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Configuration tab.
3. Click the AP Mesh button to display a screen containing AP Mesh settings, which apply to the
4. To use the AP as a Base Bridge, check the Base Bridge checkbox and configure the following
Maximum Number of When a radio has been configured as a Base Bridge, specify the maximum number of client bridges that can connect
Client Bridges to the Base Bridge.
5. To use the AP as a Client Bridge, check the Client Bridge checkbox and configure the following
Mesh Network Name When Client Bridge is enabled, enter the name of the Mesh Network that the selected radio will be a Client Bridge
on.
Max Client Bridge When Client Bridge is enabled, specify the maximum number of base bridges per client bridge in a an AP Mesh
Mesh Associations Network.
Mesh Time Out When Client Bridge is enabled, select either Enabled or Disabled to determine if the radio will time out mesh client
associations.
Configuring an AP's Global Settings
Use the Global Settings screen to define an adoption preference ID for the switch and enable an
option to adopt non-configured radios. This can be helpful when you do not want to change an
Access Port's configuration but require the Access Port be adopted.
To edit Global Radio configuration settings:
174
selected AP.
information:
information:
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01