Brocade Communications Systems RFS6000 System Reference Manual page 180

4
4. Refer to the Information field for the following information:
MAC Address Displays the Hardware or Media Access Control (MAC) address for the client. This address is hard-coded at the
factory and cannot be modified.
BSS Address Displays the client's BSSID.
IP Address Displays the current IP address for the client.
Voice Displays whether the client is a voice capable device. Traffic from voice-enabled Clients is handled differently (higher
priority) than traffic from Clients without this capability.
WLAN Displays the name of the WLAN the client is currently associated with.
WMM Displays WMM usage status for the client, including the access category currently in use. Use this information to
assess whether the client is using the correct WMM settings in relation to its intended data traffic type.
5. Refer to the Traffic field for the following information:
Pkts per second Displays the average packets per second received by the client. The Rx column displays the average packets per
second received on the selected client. The Tx column displays the average packets per second sent on the selected
client.
Throughput Displays the average throughput in Mbps between the client and the Access Port. The Rx column displays the
average throughput in Mbps for packets received on the selected client from the Access Port. The Tx column
displays the average throughput for packets sent on the selected client from the Access Port.
Avg. Bit Speed Displays the average bit speed in Mbps on the selected client. This includes all packets sent and received.
% Non-unicast pkts Displays the percentage of the total packets for the client that are non-unicast packets. Non-unicast packets include
broadcast and multicast packets.
6. Refer to the RF Status field for the following information:
Avg client Signal Displays the RF signal strength in dBm for the selected client.
Avg client Noise Displays the RF noise for the selected client.
Avg client SNR Displays the Signal to Noise Ratio (SNR) for the selected client. The Signal to Noise Ratio is an indication of overall
RF performance on the wireless network.
7.
Avg Num of Retries Displays the average number of retries for the selected client. Use this information to assess potential performance
issues.
% Gave Up Pkts Displays the percentage of packets the switch gave up on for the selected client.
% of Undecryptable Displays the percentage of undecryptable packets (packets that could not be processed) for the selected client.
Pkts
8. Refer to the Status field for the current state of the requests made from applet. This field
9. Click Cancel to close the dialog without committing updates to the running configuration.
168
Information in black represents the statistics from the last 30 seconds and information in blue
represents statistics from the last hour. Use both sets of data to trend statistics in real time
versus a measurable period (1 hour).
Refer to the Errors field for the following information:
displays error messages if something goes wrong in the transaction between the applet and
the switch.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01