Brocade Communications Systems RFS6000 System Reference Manual page 423

7.
Crypto Map Peers
To review, revise or add Crypto Map peers:
1. Select Security > IPSec VPN from the main menu tree.
2. Click the Crypto Maps tab and select Peers.
3. Refer to the read-only information displayed within the Peers tab to determine whether a peer
Priority / Seq #
Crypto Map Name
IKE Peer
4. If a Crypto Map Seq # or IKE peer requires revision, select it from amongst those displayed and
5. Select an existing Crypto Map and click the Delete button to remove it from the list of those
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
j. Refer to the Peers (add choices) field and use the Add and Delete functions as necessary
to add or remove existing peers. For information on adding or modifying peers, see
Crypto Map Peers on page
k. Refer to the Transform Sets (select one) field to select and assign a transform set for v with
Crypto Map. Again, a transform set represents a combination of security protocols and
algorithms. During the IPSec security association negotiation, peers agree to use a
particular transform set for protecting data flow.
Click OK to save the new Crypto Map and display it within the Crypto Map tab.
configuration (among those listed) requires modification or a new peer requires creation.
Displays each peer's Seq # (sequence number) to distinguish one from the other.
Displays the name assigned to the peer to differentiate it from others with similar
configurations.
Displays the IKE peer used with the Crypto Map to build an IPSec security association.
click the Edit button.
available to the switch.
6-411.
6
411