Brocade Communications Systems RFS6000 System Reference Manual page 380
Provides centralized wireless lan (wlan)
Hide thumbs
Also See for RFS6000:
- Cli reference manual (839 pages) ,
- System reference manual (574 pages)
Table of Contents
Advertisement
6
Broadcast Storm
Displays the Broadcast Storm Threshold for each interface. When the rate of broadcast packets exceeds the high
Threshold
threshold configured for an interface, packets are throttled till the rate falls below the configured rate. Thresholds
are configured in terms of packets per second. The threshold range is 1-1000000 packets per second.
Multicast Storm
Displays the Multicast Storm Threshold for each interface. When the rate of multicast packets exceeds the high
Threshold
threshold configured for an interface, packets are throttled till the rate falls below the configured rate. Thresholds
are configured in terms of packets per second. The threshold range is 1-1000000 packets per second.
Unknown Unicast
Displays the Unknown Unicast Storm Threshold for each interface. When the rate of unknown unicast packets
Storm
exceeds the high threshold configured for an interface, packets are throttled till the rate falls below the configured
rate. Thresholds are configured in terms of packets per second. The threshold range is 1-1000000 packets per
second.
Adding Layer 2 Firewall Configurations
To configure new Layer 2 firewall rules:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
3. Click the L2 tab.
4. Click the Add button.
5. Configure the following values for each new Layer 2 configuration:
Interface Name
Assign the interface to be associated with the Layer 2 firewall. Available Layer 2 interfaces are ge 1-8 and up1.
ARP Rate
Specify the Address Resolution Protocol (ARP) rate. Rates can be between 1 and 1000000.
DHCP Trust
Select to enable DHCP trust on this interface. A DHCP server must always be connected to an interface that has its
DHCP trust enabled.
ARP Trust
Select to enable ARP trust on this interface. ARP packets received on this interface are considered trusted and
information from these packets is used to identify rogue devices.
368
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Advertisement
Table of Contents
Troubleshooting
