Brocade Communications Systems RFS6000 System Reference Manual page 165

3. Click on the Add button within the List Configuration area.
4. Enter the Host Name for the device you wish to add.
5. Enter a valid MAC Address of the device you wish to add.
6. Optionally, enter the MAC Mask for the device you wish to add.
7.
8. Click OK to save and add the new configuration and close the dialog window.
9. Click Cancel to close the dialog without committing updates to the running configuration.
Mapping Include List Items to WLANs
To assign include list items to one or more WLANs:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Include tab to view NAC Included devices.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
The List Name field displays the name of the device list used. This parameter is read-only.
Refer to the Status field. It displays the current state of the requests made from the applet.
Requests are any "SET/GET" operation from the applet. The Status field displays error
messages if something goes wrong in the transaction between the applet and the switch.
4
153