6. If an existing ACL no longer satisfies switch access control requirements, select it from
7.
8. To reset the Hit Count number, click the Clear Counters button.
9. Refer to the Associated Rules field to assess the rules and precedence associated with each
Adding a New ACL
When a packet is received by the switch, the switch compares the packet against the ACL to verify
the packet has the required permissions to be forwarded. Often, ACLs need to be added as client
permission changes during switch operation.
To create a new ACL:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
3. Click on the ACL tab to view the list of ACLs currently associated with the switch.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
The ACLs field displays the list of ACLs currently associated with the switch. An ACL contains an
ordered list of ACEs. Each ACE specifies a permit or deny designation and a set of conditions
the packet must satisfy to match the ACE. Because the switch stops testing conditions after
the first match, the order of conditions in the list is critical.
amongst the existing ACLs and click the Delete button.
Use the Add button (within the ACLs field) to add an additional ACL. For more information, see
Adding a New ACL on page 6-363.
ACL. If necessary, rules and can be added or existing rules modified. For more information, see
Adding a New ACL Rule on page 6-364.
6
363