Brocade Communications Systems RFS6000 System Reference Manual page 414
Provides centralized wireless lan (wlan)
Hide thumbs
Also See for RFS6000:
- Cli reference manual (839 pages) ,
- System reference manual (574 pages)
Table of Contents
Advertisement
6
4. Refer to the Transform Sets field to view the following data:
Name
Displays a transform set identifier used to differentiate transform sets. The index is helpful when transform sets with
similar attributes need to be revised or discarded.
AH Authentication
Displays the AH Transform Authentication scheme used with the index. Options include:
•
Scheme
None - No AH authentication is used.
•
AH-MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
•
AH-SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
ESP Encryption
Displays the ESP Encryption Transform used with the index. Options include:
•
Scheme
None - No ESP encryption is used with the transform set.
•
ESP-DES - ESP with the 56-bit DES encryption algorithm.
•
ESP-3DES - ESP with 3DES, ESP with AES.
•
ESP-AES - ESP with 3DES, ESP with AES (128 bit key).
•
ESP-AES 192 - ESP with 3DES, ESP with AES (192 bit key).
•
ESP-AES 256 - ESP with 3DES, ESP with AES (256 bit key)
ESP Authentication
Displays the ESP Authentication Transform used with the index. Options include:
•
Scheme
None - No ESP authentication is used with the transform set.
•
MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
•
SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Mode
Displays the current mode used with the transform set. The mode is either tunnel or transport.
5. Select an IPSec VPN transform set (by its index) and click the Edit button to modify its
6. Select an index and click the Delete button to remove it from the table.
7.
Editing an Existing Transform Set
If the attributes of an existing transform set no longer lend themselves useful, consider editing the
transform set to be relevant with the needs of existing VPN peers.
To edit the attributes of an existing transform set:
1. Select Security > IPSec VPN from the main menu tree.
2. Click the Configuration tab.
402
properties. For more information, see
If none of the transform sets displayed appear useful, click the Add button to create a new one.
For more information, see
Editing an Existing Transform Set on page
Adding a New Transform Set on page
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
6-402.
6-403.
53-1002515-01
Advertisement
Table of Contents
Troubleshooting
