6
2. Select the Probes Found tab.
3. Refer to the following information as displayed within the Probes Found tab.
Portal MAC
client MAC
Signal Strength (dBm) Displays the signal strength when the unadopted client was detected.
Heard Channel
Heard Time
4. Select the Clear Report button to clear the statistic counters and begin a new data calculation.
450
Displays the MAC address of the unadopted client picked detected by the Enhanced Probes
enabled AP.
Displays the MAC address of the Enhanced Probe detected client.
Displays the channel frequency used when the unadopted client was detected.
Displays the time the unadopted client was detected.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01