Configuring Snmp Traps - Brocade Communications Systems RFS6000 System Reference Manual

Provides centralized wireless lan (wlan)

Hide thumbs Also See for RFS6000:

Table of Contents

2. Select the Message Parameters tab from within the SNMP Access screen.

3. Refer to the following parameters displayed with in Message Parameters screen.

Rows per Request

4. The Apply and Revert buttons are greyed out within this screen, as there is no data to be

5. Highlight an existing message parameter and edit the value. Click the Apply button to save the

6. Highlight an existing message parameter and click the Revert button to remove the changes

Configuring SNMP Traps

Use the SNMP Trap Configuration screen to enable or disable individual traps or by functional trap

groups. It is also used for modifying the existing threshold conditions values for individual trap

descriptions. Refer to the tabs within the SNMP Trap Configuration screen to conduct the following

configuration activities:

Displays the number of retries permitted

Displays the timeout in seconds

Displays the number of rows per request

configured or saved.

changes made.

Enabling Trap Configuration

Configuring Trap Thresholds

Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide

53-1002515-01

Rfs4000 Rfs7000