Brocade Communications Systems RFS6000 System Reference Manual page 452

6
9. Check the Copy the certificate request to clipboard option to add the contents of the certificate
10. Check the Save the certificate request option to save the certificate request to an external
To Use the
external server (
File Specify a filename for the certificate to be save as on the target server or local disk.
Using Use the Using drop down-menu to configure whether the log file transfer is sent using
IP Address Specify the server
User ID Enter the
Use the User ID for FTP transfers only
Password Enter the
Path Specify the appropriate
"To" parameter.
11. Click the Next button to complete the certificate request.
Using the Wizard Delete Operation
The wizard can also be used to delete entire trustpoints, the certificate used with a trustpoint or the
CA root certificate use with a trustpoint. Delete trustpoint properties as they become obsolete or
the properties of a certificate are no longer relevant to the operation of the switch.
440
If you selected to prepare a certificate request in the page 2, the wizard continues, prompting
the user for the required information to complete the certificate request. Click Next to
continue.
request to the clipboard which can then be copied to other locations.
server.and provide the server information in the fields below:
To
field to define whether the target certificate is to be sent to the system's local disk (
Server
).
IP Address
used as the switch destination for certificate requests.
User ID
credentials required to send the file to the target location.
Password
required to send the file to the target location using FTP.
Path
name to the target directory on the local system disk or server as configured using the
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
Local Disk)
or to an
FTP TFTP
or .
53-1002515-01