Brocade Communications Systems RFS6000 System Reference Manual page 326

5
5. Select the Remove Neighbors button to remove all neighbors from the selected radio's
6. Click the Detect Neighbors button to auto-determine neighbors for the radios.
NOTE
The Detect Neighbors button is enabled only when the Enable Neighbor Recovery checkbox is
selected from within the Configuration tab. Ensure this option has been enabled before trying to
detect neighbors.
Editing the Properties of a Neighbor
Use the Edit screen to specify the neighbor of a selected radio and the action the radio performs in
the event its neighbor radio fails.
To edit the properties of a neighbor:
1. Select Services > Self Healing from the main menu tree.
2. Select the Neighbor Details tab.
3. Select an existing neighbor and click the Edit button.
4. Select one of the following four actions from the Self Healing Action drop-down menu:
314
neighbor list.
Enabling this feature automatically makes each radio disassociate with their attached Clients,
clear the current neighbor list and move into detection mode to detect neighboring radios.
Neighbor detection works best if all radios are configured and adopted. Starting the automatic
neighbor detection feature disassociates Clients and clears the current neighbor configuration.
The radio index and description display in the upper right corner of the screen. The Available
Radios value represents the radios that can be added as a neighbor for the target radio.
Neighbor Radios are existing radios (neighbors).
•
None - The radio takes no action at all when its neighbor radio fails.
•
Open Rates - The radio will default to factory-default rates when its neighbor radio fails.
•
Raise Power - The radio raises its transmit power to the maximum provided its power is
lower than the maximum permissible value.
•
Both - The radio will open its rates as well as raise its power.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01