Brocade Communications Systems RFS6000 System Reference Manual page 450

6
3. Select the Configure the trustpoint checkbox to enable the new self signed certificate
4. Select the Automatically generate certificate with default values checkbox to create a
5. Select the Enter certificate credentials radio button to manually enter the values of a unique
6. Provide the following information for the certificate:
Country Define the Country used in the Self-Signed Certificate. By default, the Country is US. The field can be modified by the
user to other values. This is a required field and must not exceed 2 characters.
State Enter a State/Prov. for the state or province name used in the Self-Signed Certificate. By default, the State/Prov. field
is CA. This is a required field.
City Enter a City to represent the city name used in the Self-Signed Certificate. By default, the City name is San Jose. This
is a required field.
Organization Define an Organization for the organization used in the Self-Signed Certificate. By default, it is Brocade, Inc. The user
is allowed to modify the Organization name. This is a required field.
Organization Unit Enter an Org. Unit for the name of the organization unit used in the Self-Signed Certificate. By default, it is Wireless
Switch Division. This is a required field.
438
If generating a new self-signed certificate (as selected in page 2 of the wizard), the wizard
continues the installation. Use the third page of the wizard to enter a unique trustpoint name
and other credentials required to create the new certificate.
configured as a trustpoint.
certificate using values the switch assigns by default.
This option is recommended for generic certificates that do not represent a unique or custom
switch configuration.
certificate. If you anticipate using generic (default) values, consider using the Automatically
generate certificate with default values option.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01