Configuring Access Ports - Brocade Communications Systems RFS6000 System Reference Manual

4
8. Refer to the Status field for the current state of the requests made from applet. This field
9. Click OK to use the changes to the running configuration and close the dialog.
10. Click Cancel to close the dialog without committing updates to the running configuration.

Configuring Access Ports

Use the Access Port screen to view device hardware address and software version information for
adopted and unadopted Access Ports.
Viewing Adopted Access Ports
Use the Adopted AP tab for gathering device hardware address and software version information
for the Access Port. Use this information to determine whether the Access Port's version supports
the optimal feature set available for the network.
To view existing adopted Access Port information:
1. Select Network > Access Port from the main menu tree.
220
The CW Maximum is combined with the CW Minimum to make the Contention Window. From
this range, a random number is selected for the back off mechanism. Lower values are used
for higher priority traffic.
displays error messages if something goes wrong in the transaction between the applet and
the switch.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01