3
Transferring a File from a Server to a Wireless Switch
To transfer a file from a Server to the switch:
1. Refer to the Source field to specify the details of the source file. Use the From drop-down menu
2. Provide the name of the File.
3. Use the Using drop-down menu to configure whether the file transfer is conducted using FTP,
4. Enter an IP Address of the server receiving the configuration file. Ensure that the IP address is
5. Enter the User ID credentials required to transfer the configuration file from an FTP server.
6. Enter the Password required to send the configuration file from an FTP server.
7.
8. Use the To drop-down menu (within the Target field) and select Wireless Switch.
9. Use the Browse button to browse and select the location to store the file marked for transfer.
10. Click the Transfer button to complete the file transfer. The Message section displays the status
11. Click the Abort button any time during the transfer process to abort the file transfer.
76
and select Server.
TFTP, or SFTP.
FTP transfers require a valid user ID and password.
valid or risk jeopardizing the success of the file transfer.
Specify the appropriate Path name to the target directory on the server. The Target options are
different depending on the target selected.
of the file transfer message.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01