6
1. Select Security from the main menu tree.
2. Refer to the following information to discern if configuration changes are warranted:
Access Port Intrusion
Displays the Enabled or Disabled state of the switch to detect potentially hostile Access Ports (the definition of which
Detection
defined by you). Once detected, these devices can be added to a list of devices either approved or denied from
interoperating within the switch managed network. For more information, see
6-332.
Wireless IDS/ IPS
Displays the state of the switch protecting against threats from Clients trying to find network vulnerabilities. For
more information, see
Wireless Filters
Displays the state of the filters used to either allow or deny a MAC address (or groups of MAC addresses) from
associating with the switch. For more information, see
6-343.
Certificates
Displays the number of Server and CA certificates currently used by the switch. For more information, see
Server Certificates on page
Trustpoints
Displays the number of trustpoints currently in use by this switch. The trustpoint signing the certificate can be a
certificate authority, corporation or an individual. A trustpoint represents a CA/identity pair and contains the identity
of the CA, CA-specific configuration parameters, and an association with one enrolled identity certificate. For more
information, see
Using Trustpoints to Configure Certificates on page
Key Pairs
Displays the number of Key Pairs currently used by the switch. For more information, see
Associated Keys on page
Access Point Detection
Use the Access Point Detection menu options to view and configure the detection of other Access
Points. The Access Point Detection screen consists of the following tabs:
•
332
Wireless Intrusion Detection / Protection on page
6-433.
6-442.
Apply
Revert
The
and
buttons are greyed out within this screen, as there is no data to be configured
or saved.
Enabling and Configuring AP Detection
Configuring Firewalls and Access Control Lists on page
6-434.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
Access Point Detection on page
6-340.
Configuring Trustpoint
53-1002515-01
Creating