Speed
Duplex
Medium Type
NOTE
On a Brocade Mobility RFS7000, the MAC address for the me1 port changes when the switch
firmware is updated to the 1.3 version. This addresses an issue where the switch MAC
address and ge1 interface shared the same MAC address in previous versions.
3. Select a port and click the Edit button to modify the port configuration. For additional
Editing the Port Configuration
To modify the port configuration:
1. Select a port from the table displayed within the Configuration screen.
2. Click the Edit button.
3. Click the OK button to continue.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Displays the current speed of the data transmitted and received over the port.
Displays the port as either half or full duplex.
The Medium Type value displays the physical connection type of the port. Medium types
are:
•
Copper: Used on RJ-45 Ethernet Ports
•
Optical: Used on Fiber Optic Gigabit Ethernet Ports
information, see
Editing the Port Configuration on page
A Port Change Warning screen displays, stating any change to the port setting could disrupt
access to the switch. Communication errors may occur even if modifications made are
successful.
Optionally, select the Don't show this message again for the rest of the session checkbox to
disable the pop-up.
3-53.
3
53