In This Chapter - Brocade Communications Systems RFS6000 System Reference Manual

Switch Management

In this chapter

NOTE
HTTPS must be enabled to access the switch applet. Ensure HTTPS access has been enabled before
using the login screen to access the switch applet.
Displaying the Management Access Interface
Refer to the main Management Access interface for a high-level overview of the current switch
firmware version and the current switch log output configuration. Use this information to discern
whether a switch firmware upgrade is required (by checking the Website for a newer version) and if
the switch is outputting log data appropriately.
NOTE
When the switch's configuration is successfully updated (using the Web UI), the effected screen is
closed without informing the user their change was successful. However, if an error were to occur,
the error displays within the effected screen's Status field and the screen remains displayed. In the
case of file transfer operations, the transfer screen remains open during the transfer operation and
remains open upon completion (with status displayed within the Status field).
To display the main Management screen:
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
•
Displaying the Management Access Interface . . . . . . . . . . . . . . . . . . . . . . 451
•
Configuring Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452
•
Configuring SNMP Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454
•
Message Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459
•
Configuring SNMP Trap Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466
•
Creating and Managing Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469
Chapter
7
451