Brocade Communications Systems RFS6000 System Reference Manual page 284

5
2. Click the Relay tab.
3. Refer to the Interfaces field for the names of the interfaces available to route information
4. Click the Edit button to modify the properties displayed on an existing DHCP pool. Refer to step
5. To delete an existing DHCP pool from the list of those available to the switch, highlight the pool
NOTE
The interface VLAN and gateway interface should have their IP addresses set. The interface VLAN
and gateway interface should not have DHCP client or DHCP Server enabled. DHCP packets cannot
be relayed to an onboard DHCP Server. The interface VLAN and gateway interface cannot be the
same.
272
between the DHCP Server and DHCP clients. If this information is insufficient, consider
creating a new IP pool or edit an existing pool.
7 for the information that can be modified for the DHCP relay.
from within the Network Pool field and click the Delete button.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01