Brocade Communications Systems RFS6000 System Reference Manual page 53

System Name Displays the designated system name. Provide a system name serving as a reminder of the user base the switch supports
(engineering, retail, etc.).
Location The Location parameter serves as a reminder of where the switch can be found. Define the System Name as a specific
identifier of the switch's location. Use the System Name and Location parameters together to optionally define the switch
name by the radio coverage type it supports and physical location. For example, "second floor engineering."
Contact
Contact Displays a
responsible for switch operations.
Uptime Displays the current operational time for the device name defined within the System Name field. Uptime is the cumulative
time since the switch was last rebooted or lost power.
Firmware Displays the current firmware version running on the switch. This version should be periodically compared to the most
recent version available on the Brocade Website, as versions with increased functionality are periodically released.
AP License Displays the number of Access Port licenses currently available for the switch. This value represents the maximum number
Count of Access Ports the switch is licensed to adopt.
AAP License The License Count value displays the number of Adaptive AP licenses installed on this member.
Count
Date Displays the day, month and year currently used with the switch.
(MM/DD/YYYY)
Time Displays the time of day used by the switch.
Time Zone Use the drop-down menu to specify the time zone used with the switch. Adjusting the time zone will in turn, cause an
adjustment to the time displayed.
Country Use the drop-down menu to specify the correct country of operation. Selecting the country incorrectly could render your
switch as operating illegally.
4. Click the Restart button to reboot the switch. The switch itself does not include a hardware
CAUTION
When rebooting the switch, the Radius Server will also be restarted regardless of its state before
the reboot.
5. Click the Shutdown button to shutdown and power off the switch.
NOTE
On the Brocade Mobility RFS4000, Brocade Mobility RFS6000, and Brocade Mobility RFS7000 the
shutdown command will shutdown the switch but the fans on the switch will remain on.
6. Click the Show Dashboard button to display a screen with important indicators of switch health
7.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
value for system administration and troubleshooting. This name should be the network administrator
reset feature.
and status. For more information, see
the Details screen is recommended before new configurations are employed that utilize
increased switch bandwidth.
Click the Reset Password button to display a screen to reset the password.
Switch Dashboard Details on page
3
3-42. Referencing
41