Brocade Communications Systems RFS6000 System Reference Manual page 139

5. Refer to the Allow List field, and enter any IP address (for internal or external Web sites) that
6. Check the Use System Name in Hotspot URL to use the System Name specified on the main
7.
8. Check the Logout on Browser Close button to log out hotspot users from the network when they
9. Enter a value in the Pre-authenticated VLAN field to configure a default vlan to be used until
10. Enter a value in seconds in the Cache Ageout Time field. This is the time in seconds to age out
11. Check the Guest Login checkbox to allow the guest login option.
12. Check the Radius Based checkbox to provide the user a radius authenticated login option.
13. Check the Hotspot failover checkbox to enable the hotspot failover option.
14. Refer to the Status field for the current state of the requests made from applet. This field
15. Click OK to use the changes to the running configuration and close the dialog.
16. Click Cancel to close the dialog without committing updates to the running configuration.
Configuring MAC Authentication
The MAC Authentication option allows the user to configure a Radius server for user authentication
with the range of MAC addressees defined as allowed or denied access to the switch managed
network.
NOTE
As part of the MAC Authentication process, ensure a primary and optional secondary Radius Server
have been properly configured to authenticate the users requesting access to the ACL supported
WLAN. For more information on configuring Radius Server support for the MAC Authentication
supported WLAN, see
To configure the format of MAC addresses used in MAC Authentications:
1. Select Network > Wireless LANs from the main menu tree.
2. Select an existing WLAN from those displayed within the Configuration tab.
3. Click the Edit button.
4. Select the MAC Authentication button from within the Authentication field.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
may be accessed by the Hotspot user without authentication.
Switch configuration screen as part of the hotspot address.
Specify the maximum Hotspot Simultaneous Users to set a limit on the number of concurrent
unique hotspot users for the selected WLAN.
close their web browsers.
the user gets authorized. Specify the vlan within the range <1-4096>.
the hotspot data ready state after the client disassociation.
displays error messages if something goes wrong in the transaction between the applet and
the switch.
Configuring External Radius Server Support on page
This enables the Radius button at the bottom of the Network > Wireless LANs > Edit screen.
4
4-128.
127