Brocade Communications Systems RFS6000 System Reference Manual page 479

1. Select Management Access > SNMP Trap Receivers from the main menu tree.
2. Refer to the following SNMP trap receiver data to assess whether modifications are required.
Destination Address
Destination Address The
the SNMP agent.
Port
Port The
Community Displays the Community String and User Name specific to the SNMP-capable client that receives the traps. The
String/User Name community name is public.
Trap Version
Trap Version The
designation cannot be modified.
3. Highlight an existing Trap Receiver and click the Edit button to display a sub-screen used to
4. Highlight an existing Trap Receiver and click the Delete button to remove the Trap Receiver
5. Click the Add button to display a sub-screen used to assign a new Trap Receiver IP Address,
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
defines the numerical (non DNS name) destination IP address for receiving traps sent by
specifies a destination User Datagram Protocol (UDP) receiving traps.
defines the trap version (v1/2 or v3) defined by the SNMP-capable client receiving the trap. A trap
modify the v2c or v3 Trap Receiver.
Edit Trap Receivers as needed if existing trap receiver information is insufficient. You can only
modify the IP address, port and v2c or v3 trap designation within the Edit screen. For more
information, see Editing SNMP Trap Receivers on page
from the list of available destinations available to receive SNMP trap information.
Remove Trap Receivers as needed if the destination address information is no longer available
on the system.
Port Number and v2c or v3 designation to the new trap.
Add trap receivers as needed if the existing trap receiver information is insufficient. For more
information, see Adding SNMP Trap Receivers on page
7-468.
7-468.
7
467