In This Chapter - Brocade Communications Systems RFS6000 System Reference Manual

Switch Web UI Access and Image Upgrades

In this chapter

Accessing the Switch Web UI
Web UI Requirements
The switch Web UI is accessed using Internet Explorer version 5.5 (or later) and SUN JRE (Java
Runtime Environment) 1.5 (or later). Refer to the Sun Microsystems Web site for information on
downloading JRE.
NOTE
To successfully access the switch Web UI through a firewall, UDP port 161 must be open in order for
the switch's SNMP back end to function.
To prepare Internet Explorer to run the Web UI:
1. Open IE's Tools > Internet Options panel and select the Advanced tab.
2. Uncheck the following checkboxes:
Connecting to the Switch Web UI
To display the Web UI, launch a Web browser on a computer with the capability of accessing the
switch.
NOTE
Ensure you have HTTP connectivity to the switch, as HTTP is a required to launch the switch Web UI
from a browser.
To display the switch Web UI:
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
•
Accessing the Switch Web UI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
•
Switch Password Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
•
Upgrading the Switch Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
•
Auto Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
•
Use HTTP 1.1
•
Java console enabled (requires restart)
•
Java logging enabled
•
JIT compiler for virtual enabled (requires restart).
Chapter
2
33