5
6. Select the Enable Mobility checkbox to enable a client to maintain the same Layer 3 address
7.
8. Select the All WLANs Off button to disable mobility for each WLAN listed.
9. Click the Apply button to save the changes made within this screen. Clicking Apply overwrites
10. Click the Revert button to disregard any changes made within this screen and revert back to
Defining the Layer 3 Peer List
The Layer 3 Peer List contains the IP addresses Clients are using to roam amongst various subnets.
This screen is helpful in displaying the IP addresses available to those Clients requiring access to
different subnet resources.
To define the Layer 3 Peer List:
1. Select Services > Layer 3 Mobility from the main menu tree.
2. Select the Peer List tab.
308
Once the settings are applied, Clients within these WLANs can roam amongst different
subnets.
while roaming throughout a multi-VLAN network.
Select the All WLANs On button to enable mobility for each WLAN listed.
If unsure if you want to enable mobility for each WLAN, manually select just those you want to
enable.
the previous configuration.
the last saved configuration.
The Layer 3 Mobility screen appears with the Configuration tab displayed.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01