Brocade Communications Systems RFS6000 System Reference Manual page 404

6
3. Refer to the following information as displayed within the Interface tab:
Interface Displays the VLAN used as the inside or outside NAT type. All defined VLANs are available from the drop-down menu
for use as the interface.
Type Displays the NAT type as either:
•
Inside - The set of switch-managed networks subject to translation. These are the internal addresses you are
trying to prevent from being exposed to the outside world.
•
Outside - All other addresses. Usually these are valid addresses located on the Internet. Outside addresses pose
no risk if exposed over a publicly accessible network.
4. To Edit an existing interface, select it from the list of available interfaces and click the Edit
5. If an interface is obsolete or of no use to the NAT translation process, select it and click the
6. If modifying an existing interface is not a valid option, consider configuring a new interface. To
392
button.
An Edit Interface screen displays allowing the user to modify the VLAN and interface type
(inside or outside).
Delete button to remove it from the list of interfaces available
define a new NAT interface:
a. Click the Add button from within the Interfaces tab.
b. Use the Interface drop-down menu to select the VLAN used as the communication medium
between the switch managed network and its destination (within the insecure outside
world).
c. Use the Type drop-down menu to specific the Inside or Outside designation as follows:
•
Inside - The set of switch-managed networks subject to translation. These are the internal
addresses you are trying to prevent from being exposed to the outside world.
•
Outside - All other addresses. Usually these are valid addresses located on the Internet.
Outside addresses pose no risk if exposed over a publicly accessible network.
d. Refer to the Status field for the state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the
switch.
e. Click OK to use the changes to the running configuration and close the dialog.
f. Click Cancel to close the dialog without committing updates to the running configuration.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01