Brocade Communications Systems RFS6000 System Reference Manual page 425

Provides centralized wireless lan (wlan)
Hide thumbs Also See for RFS6000:
Table of Contents

Advertisement

3. Refer to the read-only information displayed within the Manual SAs tab to determine whether a
Priority / Seq #
Displays the Seq # (sequence number) used to determine priority. the lower the number the higher the priority.
Name
Displays the name assigned to the security association.
IKE Peer
Displays the IKE peer used with the Crypto Map to build an IPSec security association.
ACL ID
Displays the ACL ID the Crypto Map's data flow uses to establish access permissions.
Transform Set
Displays the transform set representing a combination of security protocols and algorithms. During the security
association negotiation, peers agree to use a particular transform set for protecting the data flow.
4. If a Crypto Map with a manual security association requires revision, select it from amongst
5. Select an existing table entry and click the Delete button to remove it from the list of those
6. If a new Crypto Map manual security association requires creation, click the Add button.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Crypto Map (with a manually defined security association) requires modification or if a new one
requires creation.
those displayed and click the Edit button to revise its Seq #, IKE Peer, ACL ID and security
protocol.
available to the switch.
a. Define the Seq #. The sequence number determines priority among Crypto Maps. The
lower the number, the higher the priority.
b. Provide a unique Name for this Crypto Map to differentiate it from others with similar
configurations.
c.
Enter the name of the IKE Peer used to build an IPSec security association.
d. Use the ACL ID drop-down menu to permit a Crypto Map data flow using the unique
permissions within the selected ACL.
e. Select either the AH or ESP radio button to define whether the Crypto Map's manual
security association is an AH Transform Authentication scheme or an ESP Encryption
Transform scheme. The AH SPI or ESP SPI fields become enabled depending on the radio
button selected.
6
413

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rfs4000Rfs7000

Table of Contents