Reviewing Port Statistics - Brocade Communications Systems RFS6000 System Reference Manual

To view the runtime configuration details of the uplink and downlink ports:
1. Select Switch > Ports from the main menu tree.
2. Select the Runtime tab to display the following read-only information:
Name
MAC Address Displays the port's MAC Address. This value is read-only, set at the factory and cannot be modified.
Oper Status
Speed
Duplex
MTU

Reviewing Port Statistics

The Statistics tab displays read-only statistics for ethernet ports. Use this information to assess if
configuration changes are required to improve network performance.
To view the runtime configuration details of the switch ports:
1. Select Switch > Ports from the main menu tree.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
Displays the port's current name.
Displays the link status of the port. The port status can be either Up or Down.
Displays the current speed of the data transmitted and received over the port.
Displays the port as either half duplex, full duplex, or Unknown.
Displays the maximum transmission unit (MTU) setting configured on the port. The MTU value
represents the largest packet size that can be sent over a link. 10/100 Ethernet ports have a
maximum MTU setting of 1500.
3
55