5
2. Select the Enable Neighbor Recovery checkbox.
3. Refer to the Interference Avoidance field to define the following settings:
Enable Interference
Avoidance
Average Retries
Hold Time
4. Click the Apply button to save the changes made within this screen. Clicking Apply overwrites
5. Click the Revert button to disregard any changes made within this screen and revert back to
Configuring Self Healing Neighbor Details
The Neighbor Details page displays all the radios configured on the switch and their neighbor
designations.
To configure self-healing on the switch:
1. Select Services > Self Healing from the main menu tree.
312
The Self Healing page launches with the Configuration tab displayed.
Enabling Neighbor Recovery is required to conduct manual neighbor detection.
When enabled, the switch is capable of switching channels on an Access Port (Automatic
Channel Selection) if interference is observed on the current operating channel.
Displays the average number of retries for a client to communicate with a neighbor radio.
Define a retry value between 0.0 and 15.0 retry attempts. Average Retries is a threshold
value, when exceeded ACS is initiated.
Set the interval (in seconds) that disables interference avoidance after detection. The hold
time prevents the radio from re-running ACS continuously.
the previous configuration.
the last saved configuration.
The Self Healing page launches with the Configuration tab displayed.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01