Brocade Communications Systems RFS6000 System Reference Manual page 409

NOTE
192-bit AES and 256-bit AES are not supported for manual IPSec sa configurations.
4. Highlight an existing policy and click the Edit button to revise the policy's existing sequence
5. Select an existing policy and click the Delete button to remove it from the table.
6. If the properties of an existing policy are no longer relevant and cannot be edited to be useful,
Sequence Number Define the sequence number for the IKE policy. The available range is from 1 to 10,000 with 1 being the highest
priority value.
Encryption Set the encryption method used to protect the data transmitted between peers. Options include:
•
DES 56-bit DES-CBC. The default value.
•
3DES - 168-bit Triple DES.
•
AES - 128-bit AES.
•
AES 192 - 192-bit AES.
•
AES 256 - 256-bit AES.
Hash Value Define the hash algorithm used to ensure data integrity. The hash value validates a packet comes from its intended
source and has not been modified in transit. Options include:
•
SHA - The default value.
•
MD5 - MD5 has a smaller digest and is somewhat faster than SHA-1.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01
number, encryption scheme, hash value, authentication scheme, SA lifetime and DH group.
click the Add button to define a new policy.
a. Configure a set of attributes for the new IKE policy:
6
397