Brocade Communications Systems RFS6000 System Reference Manual page 168

4
Adding an Exclude List to the WLAN
To exclude a device from a WLAN:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Exclude tab to view NAC exclude devices.
3. Click on the Add button in the Exclude Lists field.
4. Enter the name of the device that you wish to exclude for NAC authentication.
5. Refer to the Status field. It displays the current state of the requests made from the applet.
6. Click OK to save and add the new configuration and close the dialog window.
7.
Configuring Devices on the Exclude List
To add more than one device for a particular type of device in the include list:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Exclude tab to view and configure all the NAC exclude devices.
3. Click the Add button in the List Configuration field.
4. The List Name displays the read-only name of the list for which you wish to add more devices.
5. Enter the Host Name for the device you wish to add for the selected exclude list.
6. Enter a valid MAC Address for the device you wish to add.
7.
156
Requests are any "SET/GET" operation from the applet. The Status field displays error
messages if something goes wrong in the transaction between the applet and the switch.
Click Cancel to close the dialog without committing updates to the running configuration.
Optionally, enter the MAC Mask for the device you wish to add.
Brocade Mobility RFS4000, RFS6000, and RFS7000 System Reference Guide
53-1002515-01