Adjusting The Image Position - Avaya Scopia XT Series User Manual

2. To adjust the image on your monitor, select Next and continue with

Adjusting the Image Position

About this task
You can center the endpoint's image correctly on its monitor in this stage of the Quick Setup Wizard.
This is for deployments with a monitor connected to your Avaya Scopia
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
2. Decide if the monitor's image needs adjusting, by verifying if the white border of the triangles
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
Figure 11: Setting Country and Language
Table 2: Defining name and language of the XT Series
Field
System Name
System Name Unicode
Country
Language
Position on page 17.
If performing the quick setup from the web interface, access the quick setup from the
endpoint to adjust the image. This can be done at any time.
Settings with the Quick Setup Wizard
in the top left and bottom right corners are fully visible on all sides.
If the image is centered correctly, skip this procedure and select Next.
Description
Enter the name of the XT Series in the System Name field.
This name is also used by default for the SIP username and
the H.323 name, which can be manually changed.
(Web interface only) Enter the name here if it includes non-
ANSII characters such as Chinese or Japanese.
Enter the country location of the unit. The system menu and
the Language field automatically changes to the language
used in the selected country.
Choose the language of the system menus.
on page 15.
Adjusting the Image
®
XT Series.
Configuring Basic
Getting Started | 17