Configuring Avaya Ix Cu360 To Automatically Share Content; Disabling The Avaya Ix Cu360 Video - Avaya IX CU360 Using Manual

Collaboration unit

Hide thumbs Also See for IX CU360:

User manual (48 pages)

Installing and administering (62 pages)

Quick start manual (5 pages)

Table Of Contents

Table of Contents

Name

Call Rate (Kbps)

Configuring Avaya IX CU360 to automatically share

content

About this task

Configure Avaya IX CU360 to automatically share content when you connect your computer with

Avaya IX CU360 using Avaya Screen Link.

Before you begin

Your computer:

• Must have the Avaya Equinox

• Must be connected to the same network as Avaya IX CU360. If your computer and Avaya IX

CU360 are connected to different networks, NAT or a firewall must not be configured

between the two networks.

Procedure

1. Do one of the following:

• On the endpoint main menu, click Configure > Advanced > Local Presentation Mode.

• On the web interface, click Administrator Settings > Presentation > General.

2. Configure the following fields:

• On the endpoint main menu, configure Local Presentation Mode to Automatic.

• On the web interface, configure Local Presentation Mode to <auto>.

Result

Avaya IX CU360 automatically displays shared content on the screen to local participants when

the endpoint is not participating in meetings. The endpoint also displays alerts for incoming calls.

Disabling the Avaya IX CU360 video

About this task

Configure meetings to start with video disabled.

March 2019