Advertisement
RIP C
OMMANDS
(RIP)
ROUTE
route (RIP)
Overview
Use this command to configure static RIP routes.
Use the no variant of this command to disable this function.
Syntax
route <ip-addr/prefix-length>
no route <ip-addr/prefix-length>
Default
No static RIP route is added by default.
Mode
RIP Router Configuration
Usage
Use this command to add a static RIP route. After adding the RIP route, the route
can be checked in the RIP routing table.
Example
To create a static RIP route to IP subnet 192.168.1.0/24, use the following
commands:
awplus#
awplus(config)#
awplus(config-router)#
Related
show ip rip
Commands
clear ip rip route
613-50137-01 Rev A
Parameter
<ip-addr/prefix-length> The IPv4 address and prefix length.
configure terminal
router rip
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
route 192.168.1.0/24
686
Advertisement
Troubleshooting
