Object Sense Control - Datalogic Magellan 3450VSi Product Reference Manual

Object Sense Control

Object Sense Control
This feature determines whether the main illumination is controlled by the
Object Sensing system, or alternatively, stays continuously on.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
02FD00(CR)04EA8B(CR)
Object Sense Control =Disable
Product Reference Guide
= Illumination is controlled by using Object Sense
Enable
= Normal illumination is used but it goes off during sleep mode /
Disable
disable mode
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Enter/Exit Programming Mode
02FD01(CR)04EA40(CR)04CD0B(CR)
Object Sense Control = Enable
21