Chapter 3. References; Global Prefix/Suffix - Datalogic Magellan 3450VSi Product Reference Manual

This section contains explanations and examples of selected bar code features.
See the programming sections for the actual bar code labels used to configure
the reader.

Global Prefix/Suffix

Up to 20 ASCII characters may be added as a prefix (in a position before the bar
code data) and/or as a suffix (in a position following the bar code data) as indi-
cated in
Figure 9. Prefix and Suffix Positions
Example: Setting a Prefix
In this example, we'll set a prefix for all symbologies.
1. Determine which ASCII character(s) are to be added to scanned bar code
data. In this example, we'll add a dollar sign ('$') as a prefix.
2. Scan the Enter/Exit Programming Mode bar code.
3. Scan the SET PREFIX bar code.
4. Reference the
this manual, to find the hex value assigned to the desired character. The
corresponding hex number for the '$' character is 24. To enter this selec-
Product Reference Guide
Figure 9.
Prefix Label ID AIM ID
ASCII Character Set on page i
Bar Code Data
00 - 20 Characters (ASCII)
AND
OR
on the inside back cover of
Chapter 3
References
OR...
Label ID Suffix
281