Enter/Exit Programming Mode
I 2 of 5 Stitching
Enables/disables stitching for I 2 of 5 labels. When parts of an I 2 of 5 bar code
are presented to the scanner with this feature enabled, the bar code parts will
be assembled by the scanner's software, and the data will be decoded if all bar
code proofing requirements are met.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
06AF01(CR)
I 2 of 5 Stitching = Enable
216
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
06AF00(CR)
I 2 of 5 Stitching = Disable
I 2 of 5 Stitching
Magellan™ 3450VSi