Inverse Read Control - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode
1D Inverse Read Control
This configuration item is used to toggle inverted label reading for 1D bar
codes, for example, a label printed as white on black as opposed to black on
white.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
032D01(CR)
1D Read Control = Enable
18
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
1D Inverse Read Control
032D00(CR)
1D Read Control = Disable
Magellan™ 3450VSi