Enter/Exit Programming Mode
MSI Check Character Transmission
Enables/disables transmission of optional MSI check characters.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
00BE01(CR)
MSI Check Character Transmission = Enable
240
This feature applies only when MSI Check Character Calcu-
lation on page 238 is enabled. This item is ignored when the
advanced feature, Full Label Edit, is enabled.
NOTE
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
MSI Check Character Transmission
00BE00(CR)
MSI Check Character Transmission = Disable
DEFAULT
Magellan™ 3450VSi