Appendix F Host Commands; Accepting Rs-232 Commands - Datalogic Magellan 3450VSi Product Reference Manual

Accepting RS-232 Commands

The scanner responds to the following RS-232 commands:
COMMAND
Enable Scanner
Disable
Scanner
Reset Scanner
Not On File
Indication
Beep Good Read Tone
Force Good Read Tone
Identification request
Health request
Status request
a. Call Tech Support for information.
If one of the above commands is received, the scanner will perform the steps
indicated for the command. Host commands for other interfaces are also avail-
able. Contact Tech Support for more details.
Also see the section
for details concerning that feature.
Product Reference Guide
ASCII HEX COMMENT
E 0x45
D 0x44
R 0x52
F 0x46 Long series of beeps
B 0x42 Beeps if Good Read Beep is enabled
! 0x01 Beeps regardless of beep setting
i 0x69
Returns long response
h 0x68
Returns long response
s 0x73
Returns long response
"Image Capture to the Host by Host Command"
Appendix F
Host Commands
a
a
a
on page 90
319