Codabar Start Stop Character Transmission - Datalogic Magellan 3450VSi Product Reference Manual

Enter/Exit Programming Mode

Codabar Start Stop Character Transmission

Enables/disables transmission of Codabar start and stop characters.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
009301(CR)
Codabar Start Stop Character Transmission = Enable
218
This item is ignored when the advanced feature, Full Label Edit, is
enabled.
NOTE
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
gramming Mode bar code.
Codabar Start Stop Character Transmission
009300(CR)
Codabar Start Stop Character Transmission = Disable
DEFAULT
Magellan™ 3450VSi